Premium Mobile Lab Table – 1500mm x 600mm

What’s the difference between Static and Mobile tables?

All table ranges are designed to withstand the demands of commercial laboratories and schools, offering robust and reliable performance.

Why is the Trespa® TopLab® PLUS ALIGN table worktop more expensive than the Trespa® TopLab®BASE one?

Trespa® TopLab® PLUS ALIGN is engineered for demanding environments requiring high chemical resistance, antibacterial properties, and durability. Its Electron Beam Curing (EBC) technology makes it non-porous and resistant to scratches, stains, and heat, ideal for sterile and regulated labs.

In contrast, TopLab® BASE is a cost-effective option for less demanding spaces, offering general durability but without the advanced resistance and certifications of PLUS ALIGN. The premium price of PLUS ALIGN reflects its superior performance and longer lifespan in harsh conditions.

For more information, see our Trespa® datasheet

How much adjustment is there in the table feet if the floor isn’t level?

Our Heavy Duty Static Table has tilting feet which can be adjusted by up to 37.5mm. The Standard Lab Table has rigid feet which can be adjusted by up to 37.5mm.

Can you fit cupboards under the tables?

The APMG cupboards from our e-commerce range shown on this site fit beneath tables that are 900mm high and above. If the cupboards are from another manufacturer, please check the clearance chart in the technical specification or ask our friendly sales team if still not sure.

Note that the space available for cupboards is less than the length of the table. For standard tables, the space available is 100mm less than the length; for Heavy Duty tables it is 130mm less; and for Premium Mobile tables, it is 170mm less.

Can you fit appliances like fridges under the tables?

Our 925mm and 950mm height options with widths of 700mm or more accommodate a typical under-worktop fridge or white good. Always check the clearance chart in the technical specification or ask our friendly sales team if still not sure.

Can you supply tables with a small upstand attached to the rear edge?

Yes, we can! Just call 0161 799 2200 or email sales@apmg.co.uk and we’ll arrange it for you. Upstands are typically 50mm tall and the additional cost will depend on the length required.

Will the table fit through a single door?

It depends on the size of the table and the size of the door opening. All our table frames are fully welded for strength and cannot be dismantled. Please be careful to check that the access route is suitable, especially when considering larger tables.

Choosing a worktop material that’s suitable for your application is vital. We use 16mm Trespa® solid grade laminate for our tables because it’s resilient and hard-wearing – we’re not offering MDF or chipboard for this purpose as we just don’t think it’s suitable for a lab environment.

Because we believe in attention to detail, all our Trespa® worktop edges are chamfered and polished to create a smooth, high-quality bevelled edge to the surface. We also insist on a radius corner for safety and comfort – we’re keeping bruises to a minimum!

We offer two types of Trespa worktop: Trespa® TopLab® BASE, and Trespa® TopLab® PLUS ALIGN.

Trespa® TopLab® BASE

With its hard wearing surface, Trespa® TopLab® BASE is a popular choice for sectors such as education, physical laboratories and institutions, where durability and wear resistance are paramount.

APMG recommends TopLab®BASE for laboratory bench surfacing where impact resistance is important and aggressive chemicals are not in use.

This heavy-duty surface is ideal where severe use and frequent cleaning is anticipated as the surface is not adversely affected by moisture. It performs well in commercial laboratories, and its scratch resistance makes it particularly suited to schools, with the exception of A Level Chemistry laboratories.

• Greater performance with durability and impact resistance
• Scratch and wear resistance
• High dimensional stability
• Easy to clean
• Suitable for contact with food

Trespa® TopLab® PLUS ALIGN

For harsh laboratory environments which require higher chemical resistance, APMG recommends Trespa® TopLab®PLUS ALIGN. PLUS ALIGN is a new, more sustainable worktop material which combines the reliability and performance of TopLab® PLUS with a bio-based core. It has been tested with over 100 chemical agents and disinfectants.

Specifically, this material is suitable for university and A Level and GCSE Chemistry labs, and for commercial laboratories, including chemical, physical, and analytical labs.

It offers superior performance: inherent antibacterial properties, high impact and scratch resistance, and it withstands most aggressive chemicals and cleaning agents.

• Excellent resistance to most aggressive chemicals and cleaning agents
• Excellent hygiene performance being suitable to most disinfectants on the market
• Greater performance with durability and impact resistance
• Scratch and wear resistance
• High dimensional stability
• Easy to clean
• Suitable for contact with food

Our Premium Mobile Lab Table is fully mobile with the enhanced feature of using castors to offer location flexibility. The Premium Mobile Lab table comes with an option of two different sets of castors;

Heavy Duty Castor

80mm red polyurethane tyre / nylon centre wheel, pressed steel swivel castor, and pressed steel swivel and brake castor.

Fitted with a red polyurethane wheel on a nylon centre, this heavy-duty castor runs on a quality ball-bearing system for excellent rolling performance. The polyurethane wheels are durable, have a long lifespan, and offer high load-bearing capacity and excellent compression set.

Standard Smooth-Rolling Castor

This castor runs on a quality ball bearing to offer excellent rolling performance and is non-marking and gentle on floors. Our grey thermoplastic castors ensure our mobile lab tables are easy to relocate – even when fully loaded!